Fulvia
Parts for Fulvia Zagato 1,3 series 2 1972
I am searching these parts for my fulvia zagato 1.3 1972
front headlamps surrounds l&r
front grill
side Zagato "Z" badges
rear Lancia badge
rear Fulvia badge
front Fulvia 1.3 badge
interior mirror
front flash lights (repeaters?) l&r
chrome trim of the left rear glass
side flash lights (repeaters?) l&r
seats
interior chrome strip inside door, up where the interior lock fits l&r.
exterior mirror
Michael, fulmonte@yahoo.gr,
tel. +30 6932341317
Stainless steel trim
Wanted the stainless steel trim for the front end of a series 1 Fulvia
Location: Ireland
Kevin, kevinnolanceramics@hotmail.com
Wheel Caps Campagnolo Ragno 6x14
Looking for Wheel Caps ( Middle Hole ) for my Campagnolo Ragno 6x14 Wheels fitted on my Fulvia Coupe. Please make an offer via email! Ciao Mirko
Mirko, m.jalass@gmx.de,
Instrument Panel Crash Pads For 2c Berlina
I'm looking for the padded trim at the top of the windshield that holds the ends of the sun visors when in stored position. (item coloured yellow). I am also after the padded trim panel that runs from around the air vents at both ends of the dash, under the the instrument cluster & the silver panel. ( Item coloured Pink)
Either or both would be very much appreciated, as these parts are not handed, they could be from a right hand or left hand drive Berlina series 1.
Location: Bedfordshire England
Brian Hilton, bhiltonlancia@aol.com,
tel. +441525861788
Fulvia HF 1.3 for Restauration
I want to rebuild the car i once had.Thus look for restaurationproject Fulvia HF 1.3.Any condition.
Location: France, Gassin
Peter Hordijk, peter.hordijk@wanadoo.fr,
tel. 0033494974369
Lancia Fulvia front mask
Hello I'm searching a serie1 front mask of a Fulvia. Thanx for your help.
Location: Luxembourg
Spautz, antoine_spautz@web.de,
tel. 00352 691810356
Fulvia Zagato S2 headlamp bezels and grille sought
I am looking for a set of the aluminium headlamp bezels, grille and Lancia grille emblem (part no 3, 4, 15 and 17 in the image) for a series 2 Lancia Fulvia Sport Zagato in good condition (preferably for the Sport 1600 but will be more than happy with a set for the 1300 version). I have certain mainly series 1 Zagato parts to swap (including bezels and grille) if interested and look forward to hearing from you!
Ik ben op zoek naar de aluminium koplampomlijstingen, grille en Lancia grille embleem (onderdeelno 3, 4, 15 en 17 in de afbeelding) voor een tweede serie Lancia Fulvia Sport Zagato in goede staat (bij voorkeur de 1600 variant maar ook met een 1300 variant maak je me al gelukkig). Desgewenst heb ik bepaalde eerste serie Zagato delen te ruilen (waaronder koplampomlijstingen en grille) bij interesse hoor ik graag.
Location: The Hague, the Netherlands
Jorn van Beckhoven, jvanbeckhoven@hotmail.com,
tel. 0031-6-2371624
Ducellier voltage regulator
for 1974 Fulvia Coupe 1,3S
Ulrich Hopmann, hopmau@t-online.de
Fulvia 1.2 or 1.3 HF
Only original car and perfekt.
Stefano, s.ginesi@bluewin.ch
Sills
Wanted: Inner and outer sills for 1st series Fulvia Coupe. Driver and passenger side. Subframe mounting boxes, both sides. Also lower fender (wing) halves front and rear, both sides, for same.
Location: Ontario, Canada
Tim, timothyr@rogers.com
Fulvia Zagato Roll Cage
I am in need of a New or second hand Fulvia Zagato Roll cage.
Location: London England
Alex Childs, alexwchilds@yahoo.co.uk,
tel. 0207 549 0628
Fulvia Zagato 1.6 gearbox needed.
Is there anyone who has a zagato 1.6 gearbox for sale? If so please contact me, it would be very much appreciated.
Location: London
Gerardo Bertolino, acqua-blu@hotmail.com,
tel. 07769977768
Steel wheels
I am looking for two S1/S2 steel wheels for my S2 Fulvia. If anyone can help, I would be grateful. Condition is not an issue as long as they are still round! thanks
Location: UK. Peterborough
Mat, euphorbia@talktalk.net,
tel. 07764 635530
Wanted: Weber DOL carb(s)
Can you please help, I'm trying to find 1 or more Weber DOL carb(s), of any size 32, 34 or 35 in almost any condition. I have 1 32 DOL that I can match by overboring to a larger size if required,
but on its own it is useless as I don't want to use a fiat 500 engine in my Fulvia. Many thanks, Neale
Location: East Midlands, England
Neale Shepherd, neale.shepherd@airliquide.com,
tel. ##44 (0) 7703 204529, fax ##44 (0) 1530 413743
Series 1 Fulvia coupe / Zagato
Fulvia coupe Series 1 or Zagato in original condition with good interior. Don't mind scrapes / lhd but must be mechanically ok with no major rust.
Ingrid Winslow, fitzwinslow@mail.com
Fulvia parts
Looking for 2 door handles without locks (or with locks/keys) & 1 dashboard top (black plastic) for 1972 Fulvia Zagato, must be perfect, preferably new
Location: Heidelberg, Germany
John Gordon, info@magic-drinks.de,
tel. 0049-(0)6227-9215, fax 0049-(0)6227-9124
Looking for a Fulvia 1600HF engine
Condition not important
Location: UAE, Dubai
Onno le Roy, onno.leroy@burthill.com
Series 1 Fulvia / Zagato
Enthusiat looking to buy a Series 1 Fulvia coupe or Zagato. Must be original with no major rust.. Don't mind non runner / minor rust/ lhd or repaint. Hope someone has one and if you do, it will be well looked after! Thanks. Even a tip would be thoroughly investigated!
Location: Sweden
Piers FitzGerald, fitzwinslow@mail.com,
tel. + 46 40 929613
Alu doors and bonnets
I'm locking for a set of aluminium doors, front and rear bonnet for a Fulvia.
Location: Belgium, Liege
Gohy, gohycedric@msn.com,
tel. 0032495517044
Lancia Fulvia
Enthusiast seeking Lancia Fulvia in very good to excellent overall condition. Any model /year considered but would prefer a series 1 or 2. Possible trade + cash considered (1984 Posche 911) for right car. Please contact me initially via email.Thank you
Location: Manitowoc, Wisconsin, USA
Henry S. Baumann, hank.baumann@kohler.com,
tel. (920) 683-9462 or
Cell# (920) 901-4734, fax
Recherche pièces Lancia Fulvia Zagato
Achète pour Lancia Fulvia Zagato série 2
Phare avant droit et avant gauche
Pare choc avant
Pare choc arrière droit et arrière gauche
Faire offre
Location: France -
Ferre Claude, claudie.ferre@cegetel.net,
tel. 02 40 39 72 21 - 06
08 48 45 83
Lancia Fulvia Coupe Cromodoras
HI, looking for a set of second-hand Fulvia Coupe 14x6 Cromodora wheels, not too expensive.
Location: UK, Surrey, Sutton
Paul Wood, pwood13660@blueyonder.co.uk,
tel. 0208 642 1933
Fulvia series 3 radiator & shock absorbers
Hi, can anyone please help. Looking for a good second hand or good priced new radiator for my series 3 Lancia Fulvia. Also looking for reasonably priced shock absorbers for front and rear, new or second-hand.
Location: UK, Surrey. Sutton
Paul Wood, pwood13660@blueyonder.co.uk,
tel. 0208 642 1933
Lancia Fulvia Zagato
Je recherche une Lancia Fulvia Zagato entière ou à restaurer. Faire offre
Claude Ferre, claudie.ferre@cegetel.net,
tel. 0240397221 -
0608484583
Series 1 handbrake
I'd like a Fulvia coupe handbrake lever unit if anyone has one, including the rubber 'guide' if possible.
Simon Down, simon.down@ncl.ac.uk
Parts for Fulvia Berlina GT
Hello! I'm trying to restore my Fulvia. It's a 1969 Berlina GT. I need to replace the front door ventilation window's rubbers and the external mouldings. I asked Omicron etc... but nobody can help me. Any ideas?
George, samourelisg@yahoo.gr
Lancia Fulvia Montecarlo foglamps square type
Hello I'm looking for a set of Lancia Fulvia Montecarlo foglamp set the square type, not round, this ligths come on Fulvia Montecarlo 1.3s. Please e-mail me.
Location: Los Angeles California
Adan Figueroa, adanfig25@aol.com
Front and Rear Hub Tools
I 'm attempting "hat trick" by restoring" Series 1,2, and 3 Fulvia coupes. Am in need of front and rear hub tools. Due to iffy schedule and limited Lancia experience, we don't want to take advantage of generous loan offers but prefer to buy outright and offer for resale when projects are completed. Two smart sons are assisting and we are chomping at the bit as the frost is gone and the garage has warmed up enough to finish dismanteling cars. Thanks!
Location: Connecticut, USA
Bob Traver, bob57vette@aol.com
Wheels for Fulvia 1,3S Rallye, 69
I need a set of standard wheels for the mentioned car. Hope that somebody kan help me. Used wheels are OK.
Location: Denmark, Vejle
Bent Mikkelsen, bent@bmikkelsen.dk,
tel. 0045 21469007
Lancia Fulvia coupè 1.3 HF
Wanted Lancia Fulvia Coupè 1.3 HF in good condition with papers. Road car (no rollbar etc).
Location: Northen Italy - Varese
Luca Borromeo, lbmc_1@libero.it
Dunlop wheel brake cilinders.
Looking for bad Dunlop wheel brake cilinders and pistons. I overhaul Dunlop wheel brake cilinders and pistons to better than new on an exchange basis. This is a lengthy process. I would like to increase the batch sizes and thus need additional cilinders. I am mostly interested in the following sizes:
2 1/8" = 54mm. Used on the front of Flavia, Flaminia, Fulvia
1 5/16" = 33mm. Used on the rear and marked 21.
1 3/8" = 35mm. Used on the rear and marked 22.
Huib Geurink, huib@viva-lancia.com
Roll cage
Roll cage for a Ffulvia zZagato (1972) wanted new or used or any advice where to source one or have made.
Location: London UK
Alex Childs, alexwchilds@yahoo.co.uk,
tel. 0207 549 0628
Fulvia berlina (saloon) 2C
Salve, sto cercando una Fulvia berlina come quella che per 19 anni abbiamo avuto in famiglia: versione 2C, possibilmente grigio "Tordivalle" con interni rossi, anno-modello '65 o comunque prima serie. Se possibile inviare qualche foto, grazie!
Hello, I'm looking for a Fulvia saloon as the one we got in our family for 19 years: 2C engine, if possible grey "Tordivalle" with red interiors, model year 1965 or mk1 anyway. Please send some pics, many thanks!
Location: Italy, Milan - Italia, Milano
Francesco, raven2005@libero.it